6. If you want to skip the body scan and get directly to a massage,
you should first save a user profile and open it.
7. Luraco iRobotics 7 PLUS implements a high-speed
processor and advanced embedded operating system (OS)
and complex software applications. Thus, it requires system
reboot sometimes for software to reset and sensors and
electronics to be reinitialized. We recommend a chair
reboot whenever you feel a chair reset is needed.
7. Chair Adjustment
Allows user to adjust the chair to their preferred position. The chair
position will also be stored under user profile when saved. (Fig.13).
Fig.13: Chair Adjustment: This screen allows user to manually
adjust the chair.
To Next Page
Loading...
