Need help?Do you have a question about the Lutron Electronics LM-8000A and is the answer not in the manual?
General| Type | Light Meter |
|---|---|
| Display | LCD |
| Sensor | Silicon photodiode with filter |
| Operating Humidity | Less than 80% RH |
| Power Supply | 9V battery |
| Resolution | 0.1 Lux |
| Sampling Time | 0.5 second |
| Operating Temperature | 0 to 50°C |
Diagram and list of the 11 key components of the LM-8000A environmental meter.
Instructions on how to turn the meter on and off, including a self-test.
How to measure air velocity using the Anemometer mode and select units.
Measuring RH and ambient temperature in RH mode, selecting °C/°F.
Measuring temperature via Type K thermocouple input and selecting °C/°F.
Performing light measurements in Light Meter mode, selecting Lux/Footcandle.
Measuring air volume (CFM/CMM) by programming duct area.
Using the Rec button to start, view MAX/MIN values, and reset recording.
Freezing the displayed reading using the HOLD button.
Meter automatically turns off after 10 minutes of inactivity.
Guidance on replacing the 9V battery and proper disposal of batteries and device.
Formulas for calculating area and cubic volume for airflow measurements.
To Next Page