To Next PageTo Next Page
Need help?Do you have a question about the Lutron Electronics WA-2015 and is the answer not in the manual?
General| Brand | Lutron Electronics |
|---|---|
| Model | WA-2015 |
| Category | Measuring Instruments |
| Language | English |
Outlines general specifications including display size, measurement types, sampling time, and data hold.
Details conductivity measurement ranges, resolution, accuracy, and temperature compensation for uS and mS units.
Provides specifications for TDS measurements, including range, resolution, accuracy, and temperature compensation.
Details temperature measurement specifications, including measuring range, resolution, and accuracy for °C and °F.
Specifies dissolved oxygen measurement parameters, including probe type, measurement range, resolution, and accuracy.
Guides through manual temperature compensation for pH measurement, including probe preparation and adjustment.
Details pH measurement with automatic temperature compensation using an ATC probe.
Explains how to perform mV measurements for ion-selective and ORP readings.
Covers the calibration consideration and procedures for pH measurements, including buffer solutions.
Describes the procedure for measuring conductivity in uS and mS units, including probe handling and range selection.
Explains the procedure for measuring TDS in PPM, including switching units and data recording.
Details the calibration procedure for conductivity/TDS measurements, including preparing solutions and performing the calibration.
Describes the procedure for measuring dissolved oxygen, including probe preparation and measurement steps.
Details the calibration procedure for dissolved oxygen measurements, including air calibration and reading verification.
Explains how to adjust the % Salt compensation value for Dissolved Oxygen measurements.
Describes how to adjust height compensation values (meter/feet) for Dissolved Oxygen measurements.
Provides instructions for probe maintenance, including filling electrolyte and handling the diaphragm set.
Explains how to use the Data Hold function to freeze the measured value on the LCD display.
Details how to record maximum and minimum readings, and how to navigate through recorded data.
Describes the data logger function for saving measurements, including auto and manual logging procedures.
Explains how to turn the LCD backlight ON and OFF using the dedicated button.
Describes how to check the available memory space for data storage.
Explains the procedure for clearing stored data from the meter's memory.
Details how to set the meter's internal clock for date and time.
Explains how to set the sampling time interval for data logging.
Describes how to configure the auto power off management feature.
Explains how to select the temperature unit between Celsius (°C) and Fahrenheit (°F).
Details how to set the manual temperature compensation value for pH measurements.
Explains how to set the salt percentage compensation value for Dissolved Oxygen measurements.
Describes how to set the height compensation value in meters for Dissolved Oxygen measurements.
Explains how to set the height compensation value in feet for Dissolved Oxygen measurements.
Details how to set the temperature compensation factor for Conductivity/TDS measurements.
Provides instructions on how to exit the advanced setting mode and return to the normal screen.
Computer interface cable used to connect the meter to the computer via COM port.
Computer interface cable used to connect the meter to the computer via USB port.
Software for downloading data logger (data recorder) information from the meter to a computer.
Powerful application software for data logging, text display, chart display, and data query.
AC to DC 9V power adapter for the meter.
Soft carrying case for the meter.
Holder for pH electrodes and ATC Temp. probe.
