To Next PageTo Next Page
Need help?Do you have a question about the Lutron Electronics DT-2230 and is the answer not in the manual?
General| Type | Digital Tachometer |
|---|---|
| Measuring Range | 2.5 to 99, 999 RPM |
| Resolution | 0.1 RPM (2.5 to 999.9 RPM), 1 RPM (over 1, 000 RPM) |
| Time Base | Quartz crystal |
| Display | 5 digit, 10 mm (0.4 inch) LCD |
| Accuracy | +/- (0.05% + 1 digit) |
| Memory | Max value, Min value, Last value |
| Detecting Distance | 50 to 500 mm |
| Operation Temperature | 0 to 50°C (32 to 122°F) |
| Test Range Select | Automatic |
| Circuit | Exclusive one chip MICRO-PROCESSOR LSI circuit |
Details the device's display screen and its indicators.
Describes the function and operation of the power button.
Explains the role of the function button in changing modes.
Covers the memory button for recalling stored measurements.
Details the surface speed measuring wheel attachment.
Describes the contact tachometer adapter for RPM measurement.
Explains the photo tachometer detection sensor.
Details the laser light beam used for photo tachometry.
Locates and describes the battery cover and compartment.
Information on the reflecting marks used for measurement.
Explains the function of the monitor indicator light.
Details the RS-232 serial interface for data output.
Procedure for changing the tachometer's measurement function.
