9. ADVANCED ADJUSTMENT
PROCEDURES
Under do not execute the Datalogger function,
press the " SET Button " ( 3-8, Fig. 1 ) continuously at
least two seconds will enter the " Advanced Setting " mode,
press the " SET Button " ( 3-8, Fig. 1 ) once a while
in sequence to select the 13 main function, the
display will show :
SPACE..
Check memory space
Clr........
Clear Memory
dAtE.....
Set clock time ( Year/Month/Date, Hour/Minute/
Second )
SP-t......Set sampling time ( Hour/Minute/Second )
PoFF.....Auto power OFF management
t-CF......Select the Temp. unit to or ℃℉
t-SEt....
Set pH manual Temp. compensation value, pH only
SALt.....
Set DO salt% compensation, DO only
High-...
Set DO height (meter) compensation, DO only
Highf....Set DO height (feet) compensation, DO only
PEr C....
Set CD temperature compensation factor, CD only
tdS.......
Set CD to TDS or TDS to CD, CD only
ESC...... Escape from the advanced setting
Remark :
a.DO - Dissolved oxygen Mode
CD - Conductivity/TDS Mode
pH - pH/mV Mode
34
To Next Page
Loading...
