b.During execute the " Advanced Setting " function,
if press " ESC Button " ( 3-3, Fig. 1 ) will exit the
" Advanced Setting " function, the LCD will return
to normal screen.
9-1 Check memory space
When the display show " SPACE "
To check the balance data numbers that exist into the
memory ( allow the balance memorize data no. ).
@The bottom value XXXXX is the balance data numbers,
for example XXXXX=15417.
9-2 Clear Memory
When the display show " CLr "
1)To delete the existing save data numbers from the
memory.
2)Push ENTER Button to enter " Memory clear " function.
Use the " Button " ( 3-9, Fig. 1 ) or " Button " (▲▼
3-10, Fig. 1 ) to select the upper value to " yES " or
" no ".
yES - Intend to clear the Memory.
no - Not to clear the Memory.
3)If select the upper to " yES ", press the " Enter Button
" ( 3-4, Fig. 1 ) once will clear the Memory, the bottom
value will show " 0 ".
Press the ESC Button once to quite and return to
the main measurement screen.
35
To Next Page
Loading...
Need help?
General
