7. DO (Dissolved Oxygen)
MEASURING and CALIBRATION
PROCEDURE
1)Prepare the Oxygen Probe ( optional, OXPB-11 )
ATTENTION :
Fill the Probe's Electrolyte at first.
Intend to keep the DO probe under the
best condition, it should fill the
Probe's Electrolyte at first.
Probe-filling Electrolyte
Probe head with diaphragm set
The procedures that to fill the Probe's
Electrolyte, refer the chapter 7-3
" Probe maintenance ", page 29 .
24
To Next Page
Loading...
