Lutron Electronics RadioRA User Manual

Homeowner’s Guide for the RadioRA Quick Start Package 7
®
Homeowner Information
Labels
Complete Labeling
1. Apply ROOM and SCENE labels at the top of each column of buttons as shown.
2. Apply DOORS label above the left-most column of the Entry Master Control as shown.
3. Apply ALL ON and ALL OFF labels below the ALL ON and ALL OFF buttons as shown.
When you are comfortable with using your system, remove the
temporary instructional labels from the Dimmers and Master Controls.
Using the charts filled out on the previous page as a reference, apply
labels supplied with controls to the pockets below each button on the
Master Controls and Visor Control Transmitters:
1. Be sure to have clean hands—any dirt on fingers can get under the
labels permanently.
2. Use a pocket knife or other small thin instrument to help place the labels
cleanly in the SCENES column (labels go below their corresponding
button). Use a cotton swab to firmly press label in place.
10-Button Tabletop Master
Control (10T)
Multi-Function Entry
Master Control (MFE)
1
12
2
3

Lutron Electronics RadioRA Specifications

General

Brand	Lutron Electronics
Model	RadioRA
Category	Control Systems
Language	English