Need help?Do you have a question about the Lutron Electronics RadioRA 2 and is the answer not in the manual?
General| Brand | Lutron Electronics |
|---|---|
| Model | RadioRA 2 |
| Category | Control Systems |
| Language | English |
Details connecting devices wirelessly or via Wi-Fi to a router for network setup.
Explains establishing a network connection using wired Ethernet cables through a router.
Describes setting up a direct network link between devices without a router.
Covers connecting devices via Wi-Fi or wired Ethernet when using two main repeaters.
Details wired Ethernet connections through a router for a dual-repeater system.
Explains establishing a direct network link between two main repeaters.
Guides on modifying network configuration settings on a personal computer.
Provides steps to change network settings on a Wi-Fi router.
Details how to adjust network settings for the RadioRA 2 Main Repeater.
Defines a network as interconnected devices for data exchange.
Explains IP addresses as unique identifiers for devices on a network.
Describes methods devices use to acquire IP addresses, like DHCP or static assignment.
Defines DHCP as a protocol for automatically assigning IP addresses.
Explains static IP addresses as manually configured, unchanging network identifiers.
Discusses the possibility and considerations of using both DHCP and static IPs together.
Clarifies the function of a subnet mask in network message routing.
Defines a WAN as a network of networks, often spanning geographically.
Explains how home networks connect to the internet via gateway devices.
Defines a gateway IP address as the address of a device connecting a network to the internet.
To Next Page
