Occupant Copy Installation Instructions5
7. Mount Wallstation. Carefully mount and align
the wallstation as shown. Screw top and bottom
mounting screw into the control and wallbox.
Replace the adapter (for insert versions) with the
adapter screws. Then snap in the buttons and
faceplate.
8. Turn Power ON. Turn ON control breaker, or
replace main fuse.
Notes
•
Unprogrammed (out of the box) QS wallstations
and control units will all work together until they are
reprogrammed otherwise.
Typical Mounting Diagram
(Exploded View)
Wallbox
Control
Mounting screws
Adapter
Buttons
Faceplate
Adapter screws
To Next Page
Loading...
