Application Note #734
7 Customer Assistance — 1.844.LUTRON1
Preset Light Level
Change the behavior of the device when the
On
button is pressed from the
Off
state.
– Unlocked Preset (Last Level Preset) indicates that the device will come
On
to its last
On
level prior to turning
Off
.
This level is indicated by an LED that glows brighter in the locator light state.
– Locked Preset indicates that the device will come
On
to a user specified level.
Default Setting: Tapping the
On
button always sets the lights to full (Locked Preset at High-end).
1. Pull the Front Accessible Service Switch (FASS) out to the
open position.
2. Press and hold the
Off
button. (Press the left side of the button to
not mistakenly affect the light bar.)
(continued on next page . . .)
PULL
PRESS AND HOLD
To Next Page
Loading...
