Application Note #734
8 www.lutron.com/support
3. While continuing to hold the
Off
button, push the Front Accessible
Service Switch (FASS) in to the closed position. Continue to hold the
Off
button for approximately 6 seconds. The light bar will begin to
flash slowly (~4 times/second).
4. Release the
Off
button and LED 1 will continue to flash slowly
(~4 times/second).
Note: The control will automatically exit this menu after 1 minute
of inactivity.
5. While LED 1 is flashing slowly (~4 times/second) tap the
Off
button.
Some LEDs will be flashing quickly to indicate the current Preset
setting.
MIN
SEC
PUSH
HOLD
RELEASE
(continued on next page . . .)
Preset Light Level (continued)
LED 9: Light Level
Indicator / Locator Light
LED 5: Light Bar Brightness
LED 1: Preset Light Level
FASS
On
Off
To Next Page
Loading...
