Application Note #734
9 Customer Assistance — 1.844.LUTRON1
Preset Light Level (continued)
Choose either . . .
7. Tap the
Off
button to confirm and save your setting.
8. Press and hold the
Off
button for approximately 6 seconds to go
back into Normal Operation.
6. a. Unlocked Preset
Lights turn on to the level they were at the last
time they were turned off.
Touch and hold the middle of the light bar for
6 seconds until the LEDs begin scrolling.
b. Locked Preset
Lights turn on to this specified level no matter
what level they were at the last time they were
turned off.
Touch any part of the light bar to select a
preset to lock. The light bar will be flashing
quickly (~8 times/second) to indicate the
protected preset light level.
TOUCH
OR
MIN
SEC
LED 5
LED 1
TAP
MIN
SEC
TOUCH &
HOLD
PRESS &
HOLD
To Next Page
Loading...
