e for the " UV sensor "
UV sensor is with extremely
precise structure. Once don't
use it , be sure to store it in
the dry environment. For
example, put the whole sensor
including Desiccant ( Drier )
into to the Plastic bag and seal
the bag as tightly as possible
( refer the following figure ).
Take the sensor out of the bag only when use it.
Comply to above method will extend the life of UV
sensor. Otherwise, the gain of the UV SENSOR may
be decreased and shorten the calibration period. It is
also necessary to replace the Desiccant ( Drier )
periodically.
To Next Page
Loading...
Need help?
General
