Lux Products Ultra 1000 User Manual

OWNER’S
MANUAL
ULTRA 1000
ELECTRONIC ENERGY
MANAGER THERMOSTAT
MODEL TX1000
With Step-By-Step Instructions
For Installation And Operation
PRODUCTS
CORPORATION
IMPORTANT! |
|
|
|
Read and follow installation instructions in manual first,
Thank you for your confidence in our product. We would like to ensure that you obtain the best
possible results from your investment.
Before beginning to install your new thermostat, please take time to read this manual and
acquaint yourself with your purchase. By following the step-by-step procedures, you will save your-
self time, and minimize any chance of damage to the thermostat and systems.
This manual may contain information beyond that required for your particular installation,
If you encounter problems, please refer to the Technical Service section of this manual on page
31. Technical Service can be reached at 1-800-421-1130, `
Please save this manual for future reference.
Table of Contents
Features of the Lux TX1000 Electronic Setting the TIME and DAY..
Thermostat
The
Built-In
Programs.....
CAUTION! Programming your TX1000......
Tools Required. Additional Features of the TX1000.
Thermostat Location Temporary Temperature Override...
Installatio Temperature HOLD.
CAUTION! FILTER USAGE Manito
Removing the Old Thermostat .... Temperature Swing...
Mounting the TX1000 on the Wali. Static Electricity
Attach
Wires
ren
Technical
Servic!
Designation
of
Terminal
Functions
Programming
Chart
Batteries Electronic Thermostat Warranty......
Normal Operation ....
Features of the Lux TX1000 Electronic Thermostat
The TX1000 can be used with most 24 voit gas, oil or electric heating and air conditioning sys-
tems or gas millivolt heating systems.
It cannot be used with 120 volt healing systems or multistage heat pumps, Ask your dealer for
other Lux thermostats to control those systems.
With tha system switch set to HEAT, the TX1000 will automatically change to lower energy sav-
ing room temperatures, and then return to warmer “comfort” settings al specified times during the
day. There are four programming periods per day. Each can be programmed separately.
With the system switch set to COOL, the TX1000 will change to higher energy-saving tempera-
tures, and return ta cooler "comfort" temperatures as you like during the day.
You can use the hullt-in time/tamperature programs, or alter them to suit your schedule. The
TX1000 provides separate programming for weekdays, Saturday and Sunday for both heating and
cooling. You can override the programmed temperatures for as little as ane programming period or
for an entire vacation.
A large liquid crystal display shows time, day of ihe week, and room and set temperatures, It will
remind you when the filler should be changed in your blower. Temperature swing adjustment Iets
you fine-tune your system for maximum comfort and economy.
Two "AA" batteries (not included) are used 1o retain your time and temperature programs. A 4-
minute minimum off iims in COOL prevents your alr conditioning system trom being damaged.

Lux Products Ultra 1000 Specifications

General

Brand	Lux Products
Model	Ultra 1000
Category	Thermostat
Language	English

Summary

Lux TX1000 Electronic Thermostat Features

Thermostat Installation Guide

Installation Safety Precautions

Important safety warnings to follow before and during thermostat installation to prevent electrical shock and damage.

Required Tools and Thermostat Location

Lists necessary tools for installation and provides guidelines for optimal thermostat placement.

Removing the Old Thermostat

Step-by-step instructions for safely removing an existing thermostat, including wire labeling.

Attaching Wires and Mounting

Guidance on routing wires and securely mounting the TX1000 base to the wall.

Wiring Charts and Diagrams

Thermostat Power and Operation

Battery Installation and Replacement

Instructions for installing and replacing AA batteries to maintain time and temperature settings.

Normal Operation Mode

Explanation of how the thermostat displays information and operates in its standard mode.

Setting Time, Day, and Programs

Setting the Time and Day

Procedure for setting the current time and day on the thermostat display.

Understanding Built-In Programs

Overview of the pre-programmed heating and cooling schedules for different periods.

Programming and Advanced Features

Programming Your TX1000

Step-by-step guide to customizing heating and cooling schedules for weekdays, Saturdays, and Sundays.

Temporary Temperature Override

How to temporarily adjust the set temperature without changing programmed schedules.

Temperature Hold and Filter Monitor

Temperature Hold Function

How to maintain a specific temperature manually for extended periods.

Filter Usage Monitor Setup

Instructions for resetting the filter usage timer and adjusting the filter change alert limit.

Temperature Swing and Service

Adjusting Temperature Swing

Guide on adjusting the temperature swing for optimal comfort and energy savings.

Static Electricity Precautions

Advice on handling the thermostat in dry conditions to prevent static discharge damage.

Technical Service and Warranty

Information on contacting technical support and details of the electronic thermostat warranty.