LUX CS1 - Installing without a C-Wire (Power Bridge)

14 | 856.234.8803
Installing without a C-Wire
Before starting
Turn off the power at the circuit breaker
to both your heating and cooling
systems before performing any wiring.
STOP
1. Install and wire CS1
2. Install LUX Power Bridge
(at your furnace)
(sold separately)
LUX Power Bridge available at:
Shop.LUXProducts.com/PowerBridge
For installation without C-wire,
you will need to access your furnace.
Installation without C-wire
Hint: helpful videos showing how to wire a thermostat with
the LUX Power Bridge are available at:
LuxProducts.com/videos
Using the LUX Power Bridge