13
Remove a window covering from a GROUP
1. Press and hold STOP for 4 seconds to put the
remote in program mode. The backlit buttons on the
remote will flash to indicate it is in program mode.
2. Press the desired GROUP number (1– 6) on the remote.
The backlit GROUP number will flash to show
it is selected.
3. Press and hold the manual control button on the
window covering.
4. While continuing to press the manual button, press
CLOSE on the remote. The window covering will
move slightly to indicate it has been removed from
the GROUP. Release the manual control button.
5. Press and hold STOP for 4 seconds to exit program
mode. The lights will stop flashing.
PROGRAMMING
To Next Page
Loading...
Need help?
General