LuxaFlex PowerView Motorisation Guide

Set a FAVOURITE position
Each window covering has one FAVOURITE position,
which is set at 50% open by default. Setting a new
FAVOURITE position overwrites any previous setting.
1. Open or close the window covering to the desired
position.
2. Press and hold STOP for 4 seconds to put the
remote in program mode. The backlit buttons on the
remote will flash to indicate it is in program mode.
3. Press and hold the manual control button on the
window covering.
4. While continuing to press the manual control button,
press
♥
FAVOURITE on the remote. The window
covering will move slightly to indicate it has set this
window covering position as your FAVOURITE. Release
the manual control button.
5. Press and hold STOP for 4 seconds to exit program
mode. The lights will stop flashing.
14
PROGRAMMING

LuxaFlex PowerView Motorisation Specifications

General

Brand	LuxaFlex
Model	PowerView Motorisation
Category	Remote Control
Language	English