To Next PageTo Next Page
Need help?Do you have a question about the LuxaFlex Silhouette Series and is the answer not in the manual?
General| Brand | LuxaFlex |
|---|---|
| Model | Silhouette Series |
| Category | Indoor Furnishing |
| Language | English |
Define bracket positions, ensuring max 950mm distance and level placement. Avoid obstructions.
Fix brackets against the frame, coving, or ceiling for inside recess mounting.
Fix brackets against the frame or wall for outside recess mounting, removing lips as needed.
Install filler blocks for PowerRise systems with internal battery compartments.
Use optional spacer blocks for face fixing to increase clearance to the window.
Use optional extension brackets for greater clearance from the window, following standard fixing.
Slide the headrail into brackets, ensuring it clicks securely. Test by pulling.
Fit optional frame-side or back cover strips for aesthetic or protective purposes.
Install optional brackets on the bottom rail for stability, marking and fastening carefully.
Use cord loops: front to close vanes/raise, back to open vanes/lower.
Operate UltraLift by pulling cord towards centre to lower/open, straight down to raise/close.
Adjust shade rolling to one side by sliding bottom rail weight in 2 cm steps.
Refer to separate instructions for motorized blinds operation.
Pull up the shading and move bracket levers left to release the headrail.
Regular dusting and stain removal with lukewarm water and mild detergent. Avoid stretching.
Warnings about child strangulation, cord entanglement, and using safety devices.
