Charging Instructions
1. Prior to use, charge the Power Bank unit by connecting the included charging cable
into a USB power outlet
2
such as a USB charger and plug the other end into the Power
Bank’s micro USB charging port.
2. The LED indicator on the Power Bank will blink red showing that the unit is being
charged. You can find an LED behind the magnet and it is best seen in the dark. When
charging is complete, the LED indicator will go solid red. Charging time approx. 3 - 5h.
Getting Started
You can choose to control your Luxafor Bluetooth from a computer or with an Android
mobile device.
Connecting Luxafor Dot to a Computer
Connecting Luxafor Dot to an
Android Device
1. Download and install Luxafor desktop
software for your OS from
https://luxafor.com/download/ .
3
2. When the Power Bank unit is fully
charged, plug the Luxafor Dot unit into the
Power Bank.
4
1. Download the app to your device
from
https://play.google.com/store/apps/de
tails?id=com.greynut.luxafor.bt_luxof
or&hl=en
3. Remove the plastic from the double-sided
tape that is on the magnet and attach the
magnet to the surface on which you would
like to place the Luxafor Dot with the Power
Bank. (Bluetooth range without obstacles -
25 m (82 feet)).
4. Launch Luxafor software on your
computer.
3. Turn on the Bluetooth on your
mobile device.
4. Open the app and press “Connect”.
5. Choose the closest “Luxafor Dot”
from the list.
6. Wait for the devices to connect.
7. Enjoy!
5. Plug the Dongle in the computer from
which you will be controlling your Luxafor
device.
6. Wait for the devices to connect
5
& enjoy!
Contact us at support@luxafor.com or call +371 27755544
2
To Next Page
Loading...