Luxman D-03X User Manual

32
COMPACT DISC PLAYER D-03X
Digital output selection (DIGITAL OUT)
button
Remote control
To turn the digital audio output on and off,
press the digital output selection button
(DIGITAL OUT) on the remote control. Each
time the button is pressed, the output can
be turned on or off.
• When a PCM or DSD file from a PC is reproduced, this
digital audio cannot be outputted. At this time, the DIGI-
TAL OUT indicator turns off.
• When a CD is reproduced, the digital audio output can
be turned on and off.
• Each time the DIGITAL IN button on the main unit is held
down, the output can be toggled on and off. Each time
the button is held down, the output can be toggled on
and off.
• Even if the DIGITAL IN button on the remote control is
held down, the digital output cannot be toggled on and
off.
Phase invert selector (PHASE INVERT/
PHASE-INV) button
Main unit
•
Remote control
The phase of the analog output on the rear panel can be
inverted for both the balanced output and unbalanced
output.
This setting is stored on the flash memory even when the
power is turned off.
Every time this button is pressed, the phase changes as
follows: NORMAL→INVERT→NORMAL→INVERT→ …
[Phase Normal]
1. GROUND
2. COLD (–)
3. HOT (+)
[Phase Inverted]
1. GROUND
2. HOT (+)
3. COLD (–)
Dimmer button (DIMMER)
Remote control
The brightness of the main unit display can
be adjusted. The brightness can be
adjusted in 4 steps from light off to normal.
Each time the DIMMER button is pressed, the display
changes as follows. Normal light → Dim → Very dim → No
light → Normal light → …
Selection of no light displays “DISPLAY OFF” for 2 second
and the sign turns off.
It is impossible to change the brightness of LED.
How to restore all the settings to the
factory defaults
All settings can be restored to the factory defaults by the
following method
1. Turn off the unit (standby mode).
2. Press the OPERATION button on the main unit while
holding down the stop (
) button on the main unit.
All the settings will be restored to the factory defaults.
Item Default
Digital input selection CD
Digital output selection On
Phase invert selector Normal
Dimmer adjustment Normal
Zoomed display Normal
Last memory function (Memorization of
each setting)
The following table shows the settings which are saved to
the flash memory.
If the power is turned off immediately after a setting change,
the setting may not be successfully memorized.
Item Selection
Digital input selection CD, COAXIAL, OPTICAL, USB
Digital output selection ON, OFF
Phase invert selector Normal/invert
Dimmer adjustment Normal, Dim, Very dim, No light
Zoomed display Zoomed, Normal

Luxman D-03X Specifications

General

Brand	Luxman
Model	D-03X
Category	CD Player
Language	English