5
Features of This Unit
Digital input terminals
This unit is equipped with a coaxial input terminal and an op-
tical input terminal. It is compatible with S/PDIF formated sig-
nals between 44.1 kHz and 192 kHz.
Low jitter digital inputs (S/PDIF) have been achieved by using
Burr-Brown PCM9211 PLL chips.
Digital audio signals from other audio devices are played back
with significantly improved audio quality.
DD converter function
Signals encoded at 192 kHz/24 bit or less, including USB
input, are digitally reproduced over S/PDIF.
Last memory function
Built-in flash memory can memorize settings such as digital
input, Super Audio CD/CD, digital filter, etc.
Dimmer function
The display brightness can be adjusted with 4 brightness levels.
Digital output OFF
The digital audio output can be deactivated to improve the
quality of the analog audio output.
Analog output terminals
The terminals consist of a gold-plated RCA output terminal
and an XLR terminal manufactured by Neutrik.
Analog output phase switching
Both balanced output and unbalanced output are phase
switchable.
Original technologies
Our traditional, non-angled circuitry, OFC internal wiring, and
original custom-made components are used throughout the
unit.
To Next Page
Loading...