11
Names and Functions
1. Operation button (OPERATION)
Turns this unit from the standby state to operation state.
When the main power switch on the rear panel is turned
ON/STANDBY to set this unit to the standby state and this
switch is turned on, this unit is set to the operation state.
2. Operation indicator (OPERATION)
Blinks during warm-up when the operation button is turned
on and lights up when the operation state is activated af-
terward.
3. Disc tray
When inserting or removing a disc, this tray is opened or
closed by pressing the open/close button (
).
4. Open/close button ( )
Opens or closes the disc tray.
5. Remote control infrared receiver (R)
Receives signals from the accessory remote control.
6. Display window
Displays the operation status of this unit.
This display is composed of 6 indicators and display tube.
7. Digital input selection button
(DIGITAL IN)
Press this button when using the unit as a D/A converter.
Switchover is performed among coaxial, optical, USB, and
internal player.
8. Digital output selection button
(DIGITAL OUT )
Press this button to turn the digital audio output on or off.
Each time the button is pressed, the output can be turned
on or off. The digital audio output cannot be used when
playing back the HD layer of Super Audio CD.
9. Super Audio CD/CD selection button
(SACD/CD)
When playing back a Hybrid Super Audio CD, this button
should be pressed to switch between the CD playback layer
and the HD (or SACD) layer.
Front panel
127 8 9 10 11 13 14 15 16
62 1 53 4
To Next Page
Loading...
Need help?
General
