12
SUPER AUDIO CD PLAYER D-07X
10. Phase invert button (PHASE INVERT)
The phase of the analog output on the rear panel can be in-
verted for both the balanced output and unbalanced output.
This setting is stored on the flash memory even when the
power is turned off.
Every time this button is pressed, the balanced phase
changes as follows: NORMAL → INVERT → NORMAL →
INVERT → …
[Phase Normal]
1. GROUND
2. COLD (–)
3. HOT (+)
[Phase Inverted]
1. GROUND
2. HOT (+)
3. COLD (–)
11. Play button (
)
Plays back a disc.
12. Play indicator
Lights up while a disc is being played back. Blinks while
playback is being paused.
13. Pause button ( )
When this button is pressed during playback, the playback
stops. When this button is pressed again, the playback
starts again. During pause, the play indicator blinks.
14. Stop button ( )
Stops playback.
15. Previous button ( )
When this button is pressed once, the playback returns to
the beginning of current track. When this button is pressed
twice, playback returns to the beginning of the previous
track.
16. Next button ( )
When this button is pressed, the playback jumps to the be-
ginning of next track.
To Next Page
Loading...
Need help?
General
