Need help?Do you have a question about the Luxman L-590AXII and is the answer not in the manual?
General| Type | Integrated amplifier |
|---|---|
| Input Sensitivity / Impedance (Phono MM) | 2.5mV / 47kΩ |
| S/N Ratio (Phono MC) | 75dB |
| Power Output | 30W + 30W (8Ω) |
| Rated Output | 30W + 30W (8Ω) |
| Input Sensitivity (LINE) | 180mV |
| S/N Ratio (LINE) | 100dB |
| Dimensions (W x H x D) | 440mm |
Ensures proper placement and airflow for heat dissipation and stable operation.
Safety guidelines for connecting components and speakers to prevent damage.
Covers sound delay, protection circuits, battery handling, and cleaning procedures.
Instructions for cleaning and guidance on seeking professional repair services.
Details LECUA1000 attenuator and ODNF feedback for high-fidelity sound reproduction.
Highlights parallel output stages, high-inertia power supply, and speaker relays.
Features like Beeline construction, selector switch IC, and OFC wiring for optimal signal path.
Explains phono amp, separate function, chassis structure, and terminal types for versatile use.
Features cast-iron insulators, headphone jack, needle-type meters, and aluminum remote finish.
Identifies front panel controls such as Operation, Input Selector, Volume, and Tone controls.
Explains indicators like Standby, Line Straight, and Power Meters for operational status.
Details signal ground, Phono, Line, Balanced, and Recorder terminals for connectivity.
Describes Pre-out, Main-in, Phase inverters, AC inlet, and speaker terminals for system integration.
Visual guide illustrating connections for audio sources, recorders, and speakers.
Instructions for connecting power, audio sources, and speakers correctly.
Guidance on recorder connections and using PRE OUT/MAIN IN terminals for system expansion.
Steps for powering on, selecting sources, and basic sound adjustment for playback.
Explains how to use Line Straight, Balance, and Tone controls for audio tuning.
Procedures for timer-controlled recording and playback processes.
Details managing saved settings and performing a factory reset for the unit.
Explains primary remote functions including Operation, Input, Mute, and Meter control.
Details using the remote for Subsonic, Loudness, Line Straight, and Volume adjustments.
Guide for loading and replacing batteries in the remote control unit.
To Next Page
