Need help?Do you have a question about the Luxman L-10 and is the answer not in the manual?
Adjusts sound level and channel balance for optimal listening.
Selects audio sources and controls amplifier power on/off.
Configures playback mode, headphone use, and bass tone adjustments.
Indicates power status and enables private headphone listening.
Selects bass turnover frequencies for tone control.
Adjusts treble response and bypasses tone circuitry.
Removes low-frequency noise and selects tape playback sources.
Manages recording modes for TAPE-1 output selection.
Manages recording modes for TAPE-2 output selection.
Connects various audio sources, tape decks, and pre/power amps.
Connects speakers, ground, and auxiliary power devices.
Guidelines for optimal placement and heat dissipation.
Details on overcurrent, DC sensing protection, and time-delay muting.
Advice on speaker, input, and jumper pin connections.
Connects input sources, output loads, and AC power.
Guides on connecting players, tuners, and tape recorders.
Ensures correct speaker connection for stereo playback.
Details on speaker cords, AC power, and auxiliary equipment.
Discusses shielded wires, capacitance, and optimal cable length.
Connects the record player and its earth lead to the amplifier.
Traces signal from disc to speaker via equalizer and controls.
Guides on setting controls for optimal record playback.
Explains connecting and playing audio from a tuner.
Connects tape decks via monitor terminals for playback.
Plays tape via AUX inputs, requiring input selector adjustment.
Connects amplifier output to tape recorder input for recording.
Copies tapes from one recorder to another via the amplifier.
Records and monitors simultaneously using 3-head tape decks.
Details the new volume control for smooth, precise sound level adjustment.
Adjusts channel balance and selects playback modes (stereo, mono).
Reverses left and right audio channels for correction.
Compensates recording characteristics and adjusts tone.
Explains bass/treble controls, turnover frequencies, and limitations.
Removes ultra-low frequency noises caused by record warps or rumble.
To Next Page
General
