Need help?Do you have a question about the Luxman L-410 and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Power Output | 80 watts per channel into 8Ω (stereo) |
| Frequency Response | 15Hz to 50kHz |
| Total Harmonic Distortion | 0.02% |
| Signal-to-Noise Ratio | 82dB (MM), 100dB (line) |
| Input sensitivity | 2.5mV (MM), 150mV (line) |
| Signal to noise ratio | 82dB (MM), 100dB (line) |
| Dimensions | 453 x 317 x 111mm |
| Weight | 9.2kg |
Procedure for adjusting the amplifier's idle current.
Visual breakdown of the amplifier with corresponding part numbers.
Component list for the PB-1408-1 circuit board assembly.
Component list for the PB-1408-2 circuit board assembly.
Component list for the PB-1408-3 circuit board assembly.
Component list for the PB-1408-4 circuit board assembly.
Component list for the PB-1408-5 circuit board assembly.
Component list for the PB-1408-12 circuit board assembly.
Component list for the PB-1409A-1 and PB-1409A-2 circuit board assemblies.
Component list for the PB-1409A-3 circuit board assembly.
Component list for the PB-1409A-4 circuit board assembly.
Component list for the PB-1409A-5 circuit board assembly.
Component list for the PB-1409A-8 circuit board assembly.
Component list for the PB-1410 circuit board assembly.
To Next Page
