Need help?Do you have a question about the Luxman L-225 and is the answer not in the manual?
Details on connecting a DC voltmeter and adjusting RV10la and RV10lb.
Detailed circuit diagram illustrating the amplifier's electrical connections.
Technical specifications for the L-235 and L-225 integrated amplifiers.
Details on connecting a DC voltmeter and adjusting RV10la and RV10lb.
Detailed circuit diagram illustrating the amplifier's electrical connections.
Technical specifications for the L-235 and L-225 integrated amplifiers.
General| Total Harmonic Distortion | 0.03% (1kHz, 50W) |
|---|---|
| Input Sensitivity (line) | 150mV |
| Input sensitivity (MM) | 2.5mV |
| Speaker load impedance | 8Ω to 16Ω |
| Frequency Response | 10Hz to 100kHz |
| Signal to noise ratio (line) | 82dB (line) |
To Next Page
