Need help?Do you have a question about the Luxman L-505u and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Total Harmonic Distortion | 0.007% (8Ω, 1kHz) |
| Input Sensitivity / Impedance (Phono MM) | 2.5 mV / 47 kΩ |
| Input Sensitivity / Impedance (Line) | 180mV / 47kΩ |
| Input Sensitivity (LINE) | 180mV |
| S/N Ratio (Phono MM) | 91dB |
| S/N Ratio (Phono MC) | 75 dB |
| S/N Ratio (Line) | 100 dB |
| Power Output | 100W + 100W (8Ω) |
| Frequency Response | 20Hz - 100kHz (+0, -3dB) |
| Input Sensitivity / Impedance (Phono MC) | 100μV / 100Ω |
| Weight | 18.0kg |
| Dimensions | 440 x 177 x 463mm |
Guidelines for proper installation, ensuring ventilation and avoiding adverse conditions.
Important safety advice for connecting audio components and speaker systems.
Information on delayed sound output and the unit's protection circuit features.
Guidance on battery replacement, servicing, and cleaning the equipment.
Detailed overview of controls located on the front panel of the unit.
Identification and explanation of all input and output terminals on the rear panel.
Connecting the power supply and various audio input devices to the amplifier.
Detailed instructions for connecting speakers and recorders.
Guidance on connecting record players and using PRE OUT/MAIN IN terminals.
Steps for initial setup, playback, and operating key sound controls.
How to record audio sources and utilize timer-controlled playback.
Information on stored settings and restoring factory defaults.
Using mute, display controls, and aiming the remote effectively.
Instructions for loading AAA batteries into the remote control.
To Next Page
