Need help?Do you have a question about the Luxman LV-117 and is the answer not in the manual?
Illustrates necessary test equipment connections for performance adjustments.
Specifies initial settings for controls like power switch, speaker switch, and volume.
General| Type | Integrated Amplifier |
|---|---|
| Power Output | 80 watts per channel into 8Ω (stereo) |
| Frequency Response | 10Hz to 100kHz |
| Total Harmonic Distortion | 0.02% (THD) |
| Input Sensitivity | 0.37mV (MC), 2.5mV (MM), 150mV (line) |
| Signal-to-Noise Ratio | 72dB (MC), 90dB (MM), 107dB (line) |
| Signal to noise ratio | 72dB (MC), 90dB (MM), 107dB (line) |
| Dimensions | 430 x 135 x 360 mm |
| Weight | 9.4kg |
| Speaker load impedance | 4-16 ohms |
To Next Page
