Need help?Do you have a question about the Luxman LV-100 and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Input Sensitivity | 150mV |
| Signal to Noise Ratio | 78dB (MM) |
| Frequency Response | 20Hz - 20kHz |
| Signal-to-Noise Ratio | 95dB (line) |
| Total Harmonic Distortion | 0.05% |
Lists integrated circuits used in the main P.C. board.
Lists transistors used in the main P.C. board.
Lists diodes used in the main P.C. board.
Lists coils used in the main P.C. board.
Lists relay used in the main P.C. board.
Lists jacks used in the main P.C. board.
Lists capacitors for the unit.
Lists the fuse component.
Lists capacitors for the unit.
Lists resistors for the unit.
Lists IC for the function P.C. board.
Lists diodes for the unit.
Lists switches for the unit.
Lists capacitors for the unit.
Lists resistors for the unit.
Lists components for the speaker switch P.C. board.
Lists miscellaneous components.
Lists fuses, sockets, plugs, and transistors.
Lists power transistors and switches.
Lists screws, covers, and holders.
Lists knobs and control components.
Lists owner's manuals and packing materials.
Details capacitor part numbers by destination.
Details fuse and connector part numbers by destination.
Lists capacitor specifications based on destination.
Provides part numbers for various components by region.
To Next Page
