Need help?Do you have a question about the Luxman LV-105 and is the answer not in the manual?
General| Type | Hybrid Integrated Amplifier |
|---|---|
| Frequency Response | 10Hz to 100kHz |
| Valve Complement | 2 x 6CG7 |
| Weight | 12kg |
| Input Sensitivity | 0.3mV (MC), 2.5mV (MM), 150mV (line) |
| Signal to Noise Ratio | 100dB (line) |
| Speaker Load Impedance | 4Ω to 16Ω |
Steps to remove the front panel, escutcheon, and related P.C. boards.
Procedures for removing various internal P.C. boards like Tone, MM/MC, Volume, etc.
Steps for removing Front Aux, AV boards, Speaker Terminal, and Rear Covers.
Procedures for removing the Protect P.C. Board and the Main P.C. Board.
Detailed steps for performing the idling adjustment on the Main P.C. Board.
Visual guide showing adjustment points on the Main P.C. Board.
Detailed schematic diagrams for Volume Control and Front/AUX P.C. Boards.
Detailed schematic diagrams for Equalizer, AV Monitor, and AV Terminal P.C. Boards.
Detailed schematic diagrams for MM/MC, Tone, Function/LED, MAIN, REC Selector P.C. Boards.
Detailed schematic diagrams for Protect, Speaker Switch, Heat-up/Switch, Tone/LED P.C. Boards.
Parts list for the Equalizer P.C. Board, including transistors, diodes, and resistors.
To Next Page
