Need help?Do you have a question about the Luxman LX-380 and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Output Power | 36 W + 36 W (4Ω), 32 W + 32 W (8Ω) |
| Signal-to-Noise Ratio | 90 dB |
| Dimensions | 440 (W) x 197 (H) x 230 (D) mm |
| Weight | 17.6 kg |
| Frequency Response | 20Hz - 80kHz (+0, -3.0dB) |
| Inputs | 4 x Line, 1 x Phono |
| Output Impedance | 4Ω - 8Ω |
| Vacuum Tubes | 12AX7 x 2, 12AU7 x 2 |
Proper placement for heat dissipation and avoiding blocked vents.
Precautions for connecting speakers and other components to prevent damage.
Information on time muting circuit, repair, and cleaning.
Warnings regarding unit weight, hot surfaces, and safe usage environments.
Mentions wooden case, beam tetrode configuration, and aluminum knobs.
Details phono amplifier, tone control, LECUA attenuator, and selector IC.
Covers subsonic/monaural functions, headphone output, and separate function.
Details recorder I/O, large speaker terminals, and RCA pitch.
Features like high-quality relays, aluminum remote, and vacuum tube design.
Explains the operation switch and frequency selectors for tone control.
Details Line Straight and Loudness functions for sound quality.
Covers input selector, monitor switch, and cartridge selection.
Details Subsonic, Mode, and Separate function switches.
Explains volume, balance, and speaker selection controls.
Covers remote sensor and headphone jack functionality.
Details how to adjust the high frequency range using the treble control.
Details how to adjust the low frequency range using the bass control.
Details PHONO, LINE-1 to LINE-4, and MONITOR input connections.
Covers REC OUT, SIGNAL GROUND, and PRE OUT terminals.
Explains PRE OUT, MAIN IN, and SPEAKER terminals.
Details the AC inlet for power supply.
Pre-connection steps and power supply connection instructions.
How to connect CD, SACD, tuner, and other input devices.
Detailed guide on connecting speaker systems correctly.
How to connect turntables, recorders, and phono sources.
Instructions for connecting PRE OUT/MAIN IN terminals.
Steps before operation and basic playback procedure.
How to use line straight, balance, and tone controls.
Steps for selecting and recording audio sources.
Details volume, mute, and CD/SACD player control buttons.
Guide for loading dry cell batteries into the remote control.
Details rated output, THD, and input sensitivity/impedance.
Covers frequency response, S/N ratio, and tone control.
Lists features, circuit type, tubes, accessories, and power details.
Details external dimensions and unit weight.
Solutions for no power, no sound, or unbalanced sound problems.
Fixes for humming, tone control, and feature activation problems.
To Next Page
