9
25. Pre-out terminals (PRE OUT)
Provide the output of the preamplifier section. A bi-amp
connection can be performed with a combination of an ex-
ternal power amplifier because this terminal always provides
output regardless of the separate switch setting.
Do not insert shortpin plugs into PRE OUT. No sound is
generated.
26. Main in terminals (MAIN IN)
Provides input to the main-amplifier section directly when
the pre-amplifier and main-amplifier are separated by set-
ting the separate switch to on.
* The sound volume cannot be adjusted. Adjust the volume
at the input device side.
27. Speaker terminals (SPEAKERS)
Connect speaker systems.
The right speaker terminals shall be connected to the R
side, and the left speaker terminals shall be connected to
the L side in consideration of the polarity.
General type
terminal
* It is possible to insert cables from below
as well as from above.
28. AC inlet (AC IN)
Connects the accessory power cable. The power shall be
supplied from a household wall socket.
Note:
This symbol represents CLASSII apparatus with
functional earth terminal. (Signal ground terminal)
To Next Page
Loading...
Need help?
General
