EasyManuals Logo

Luxman LX-380 User Manual

Luxman LX-380
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
VACUUM TUBE INTEGRATED AMPLIFIER LX-380
17
Specifications
Rated output 20 W + 20W (6Ω)
Total harmonic distortion 1 % or less (1 kHz, 20 W/6 Ω, at stereo, with LINE STRAIGHT “ON”)
Pre-amplifier
Input sensitivity/input impedance
(PRE OUT: 1 V)
PHONO (MM) : 3.0 mV/47 kΩ
PHONO (MC) : 0.38 mV/100 Ω
LINE : 180 mV/47 kΩ
MONITOR : 180 mV/47 kΩ
Main-amplifier
Input sensitivity/input impedance
MAIN IN : 690 mV/100 kΩ
Output voltage REC OUT : 180 mV
PRE OUT : 1 V
S/N ratio PHONO (MM) : 84 dB or more (PRE OUT, IHF-A correction, 3.0 mV input)
PHONO (MC) : 67 dB or more (PRE OUT, IHF-A correction, 0.38 mV input)
LINE : 95 dB or more
(IHF-A correction, input shorted, LINE STRAIGHT “ON”)
Frequency response PHONO (MM) : 20 Hz - 20,000 Hz
(within ±0.5 dB, LINE STRAIGHT “ON”)
PHONO (MC) : 20 Hz - 20,000 Hz
(within ±0.5 dB, LINE STRAIGHT “ON”)
LINE : 20 Hz - 80,000 Hz
(within –3 dB, LINE STRAIGHT “ON”)
Tone control BASS (150 Hz) : ±8.0 dB at 20 Hz
BASS (300 Hz) : ±8.0 dB at 40 Hz
BASS (600 Hz) : ±8.0 dB at 100 Hz
TREBLE (1.5 kHz) : ±8.0 dB at 10 kHz
TREBLE (3 kHz) : ±8.0 dB at 20 kHz
TREBLE (6 kHz) : ±8.0 dB at 40 kHz
Supplied functions [Front panel]
• Operation switch
• Input selector
• Monitor switch
• Tone control
• Separate switch
• Subsonic switch
• Speaker selector (OFF/A/B/A+B)
[Rear panel]
• Input/output terminals
• Signal ground terminal
[Remote control function]
• Volume (up/down)
• Volume control
• Balance control
• Turnover frequency selector switch
• Cartridge selection switch (MM/MC)
• Line straight switch
• Mode switch • Loudness switch
• Headphone jack
• Speaker terminals
• AC inlet
• Mute
Circuit Driver: Mullard circuit, Output: Beam tetrode connection
Vacuum tube used 4x 6L6GC / 3x ECC82
Accessories • Remote control RA-25
• Owner’s Manual (This document)
• Safety cautions
• Power cable
• 2 pieces of “AAA” batteries
Power source
230 V (50 Hz)
Power consumption 127 W
Max. external dimensions 440 (W) x 197 (H) x 403 (D) mm
(front side knob with 25 mm and rear side terminal with 28 mm included in
depth)
Weight 17.6 kg (main unit)
* Specifications and appearance are subject to change without notice.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Luxman LX-380 and is the answer not in the manual?

Luxman LX-380 Specifications

General IconGeneral
BrandLuxman
ModelLX-380
CategoryAmplifier
LanguageEnglish

Related product manuals