1 Introduction
The LX 16-D built in sensor is high quality pressure transducer, to guaranty high
accuracy of vario signal and its zero . A modern low-power microcontroller drives the
LCD vario indicator and supports input controls. All necessary inputs are made by using
of one external rotary switch with a push button.
The unit has no on/off switch, therefore we recommend that you install an external
switch, or just use an avionic master switch. A 1 amp fuse is recomended.
2 Technical data
• 57 mm standard cut out
• 65 x 65 x 98 mm without connector and pressure inlet
• 3 ranges 2.5m/s, 5m/s, 10 m/s, (5kts, 10kts, 20kts,)
• Averager (20s )
• Flight time indicator
• Power consumption is approx. 60 mA/12V, (up to about 90mA depending on
audio volume)
• TE compensation: TE tube
• Weight: apr. 260 gr.
• All cables and external button are included in the delivery
• Power supply: 8-16 V DC
To Next Page
Loading...
Need help?
General