Filter selection:
On the third push of the button, the option for selecting the vario Filter will show up.
The vario filter range is from 0.2 till 5, in steps of 0.1.
The default value is set to 3.
Changing of audio volume
• Turn the external rotary switch clockwise for volume increase, and vice-versa for
volume decrease. Note, that this will not work while in the setup menu.
3.3 Flight time indicator
The flight time indicator will show flight hours and minutes of the actual flight. The
counter will be activated automatically after climbing will be detected. After landing the
flight time indicator will stop automatically. A blinking decimal dot will indicate that the
flight time indicator is active.
To Next Page
Loading...
Need help?
General