Lydsto HD-STYTJ-B01 User Manual



Lydsto HD-STYTJ-B01 Specifications

General

Brand	Lydsto
Model	HD-STYTJ-B01
Category	Vacuum Cleaner
Language	English

Summary

Safety Instructions

Battery and charging

Packing List

Basic Parameters

Instructions on Environmental Protection

Product Introduction

Machine

Overview of the robot's physical components and operational controls.

Description of Indicator Status

Dust Collection Charging Pile

Description of Indicator Status of Dust Collection Charging Pile

Details the indicator lights and their meanings for the dust collection charging pile.

Install the Dust Collection Charging Pile

Use

Remove the Limit Bar

Instructions for removing protective limit bars before operating the robot.

Charging of the Sweeping and Mopping Robot

Guidance on how to start the robot and initiate automatic recharging.

Connect to Lydsto APP

Reset Wi Fi

Steps to reset the robot's Wi-Fi connection and pairing status.

On/Off/Pause

Add water to the water tank or clean the mop cloth mid way

Procedure for adding water or cleaning the mop cloth during operation.

Set the Cleaning Mode

Information on default cleaning modes and customization via the APP.

Automatic Recharge/Manual Recharge

How the robot handles low battery and manual recharge commands.

Failure State

What to do when the robot encounters an error or abnormal condition.

Maintenance and Upkeeping

Replace the Dust Bag

Procedure for replacing the dust bag in the automatic dust collection charging pile.

Clean the Dust Passage

Clean the Infrared Lens/Charging and Dust Collection Sensor Head

Clean the Filter Screen of the Fan

Clean the Main Brush

Clean/Replace the Side Brush

Clean the Sensors

Battery Maintenance

Clean the Two-in-one Water Tank

Troubleshooting