3.1 Product Introduction
The infrared thermometer is a high-quality product, it adopts infrared technology, each start-up will be self-testing to
ensure the accuracy of measurement, this infrared thermometer is mainly used to measure the temperature of the
forehead of the human body.
This product can perform accurate and stable temperature measurement. Users only need to point the probe head on the
forehead and press the measurement button, and the body temperature can be measured quickly and accurately in one
second.
To ensure the accuracy of measurement and safety of use, please read the manual carefully before use.
This product is widely used in schools, customs, hospitals, homes and other places.
3.2 Scope of Application
The body temperature is measured by measuring the human body's thermal radiation.
3.3 Structure and Composition
It consists of a housing, an infrared temperature sensor, a signal receiving processor, buttons, a COB board, a buzzer, and
an LCD display.
3.4 Preventive Examination
1. Before measurement, the infrared thermometer shall be proofread to check the function of each component and keep
the good performance of the infrared thermometer.
2. Maintain sufficient power supply to determine whether the external environment is in accordance with the product
operating environment.
3. After the product is packed, it is allowed to be transported by common means of transportation, but it should avoid
the mechanical collision of rain, damp and extrusion box.
3.5 Statement
The clinical accuracy or the clinical deviation of the infrared thermometer has passed the clinical verification, and its safety
and effectiveness meet the requirements of the relevant national laws and regulations. For the claimed performance
verification method, please contact our customer service department.
To Next Page
Loading...