Need help?Do you have a question about the Lynx L30FR and is the answer not in the manual?
Important safety notice regarding outdoor use only and California Proposition 65.
Guidance for installers on local codes, installation standards, and safety notes.
Step-by-step safety instructions for responding to a gas leak.
Safety rules for storing flammable liquids and LP cylinders near the grill.
Essential safety checks and steps to perform before lighting the grill.
Covers safety regarding flammable materials, LP cylinders, child supervision, and moving the grill.
Adherence to required clearances from combustibles and usage restrictions for installation.
Advisory on potential performance issues and heat buildup when using the grill in windy conditions.
Details on LP hose and regulator safety features and cylinder connection requirements.
Procedure to reset the LP gas flow control device if it activates due to improper lighting.
Required clearances for installing the grill in built-in configurations, including rear hood.
Minimum clearances from sides, back, and overhead combustible materials for safe installation.
Dimensions for CocktailPro plumbing, countertop notch, and insulated jacket requirements.
Tables detailing cutout dimensions for various Lynx grill models and accessories.
Step-by-step guide for safely unpacking the grill from its pallet and packaging.
Instructions for inspecting and maintaining the briquette trays, including replacement.
Guidelines for proper electrical grounding and AC power connection, including GFI outlets.
Procedure for replacing D cell batteries and information on electrical amperage.
Ensuring the grill is orificed for the correct gas type (LP or NAT) and verifying the rating plate.
Requirements and codes for proper natural gas hook-up and supply lines.
Guidelines for connecting LP gas, tank requirements, and safe outdoor cylinder storage.
Procedure for purging the LP gas line after initial connection to remove air.
Comprehensive safety rules for operating the grill, including unattended use and hot surfaces.
Warning about potential fire hazards caused by insects nesting in grill burners.
Safe method for performing leak tests outdoors, avoiding ignition sources.
Steps for identifying, stopping, and repairing gas leaks, including cylinder replacement.
Diagrams illustrating the control panel layout for different Lynx professional grill models.
Identification of standard brass burners, ProSear, and Rotis infrared burners.
Instructions and benefits of searing and performing indirect cooking on the grill.
A checklist of essential safety and operational checks before lighting the grill.
Specific safety warning regarding the ProSear burner and potential damage from misuse.
Critical safety steps before lighting, including gas odor checks and pre-lighting checklist.
Step-by-step guide for lighting brass burners and preheating the grill to optimal temperature.
Procedures for match-lighting burners and adjusting the low heat setting.
Key safety precautions, including handling hot burners and avoiding water contact.
Instructions for lighting the ProSear burner and cleaning it after use.
Warning for LP units regarding potential 'burn back' issues in extremely cold conditions.
Instructions for installing the motor, loading the skewer, and using a basting pan.
Procedure for lighting and operating the rotisserie infrared burner, including wind considerations.
Safety warning against using the smoker box over ProSear burners and general usage guidelines.
Guidance on selecting, soaking, and using wood chips for smoking applications.
Proper methods for cleaning stainless steel surfaces and grill racks.
Procedures for cleaning the drip tray and briquette trays for optimal performance and safety.
Warning to maintain clearance around the grill, keeping the area free from combustibles.
Steps for removing, cleaning, and adjusting the air shutter for brass burners.
Instructions for cleaning obstructions from the ProSear burner inlet.
Critical safety warning regarding the importance of centering burners on their orifices.
Diagnosing and resolving issues related to the grill not lighting or having low heat.
Troubleshooting steps for burners blowing out and the rotisserie burner not lighting.
Steps to diagnose and fix problems with the grill's internal lighting system.
Procedure for safely replacing the work light bulbs in the grill.
Instructions for safely removing and inserting briquettes using clips, with a warning about sharp edges.
Guides for connecting gas supply to side burners in both built-in and cart configurations.
Safety warnings before lighting and procedures for preheating the LPSGE unit.
Steps for match-lighting the side burner and adjusting its low heat setting.
Details on limited lifetime, five-year, and one-year warranties for grill components.
Information on limitations, exclusions, and items not covered by the manufacturer's warranty.
Essential information and questions to address before contacting Lynx for service.
Procedure for reporting and filing claims for visible or concealed shipping damage.
Schematic diagrams illustrating the electrical wiring for L27 and L30 grill models.
Schematic diagrams illustrating the electrical wiring for L36, L42, and L54 grill models.
Guidelines for gas pipe sizing based on length and BTU requirements for proper grill performance.
Specifications for required water column pressure for natural gas and liquid propane.
Diagrams highlighting major grill components such as hood, burners, firebox, and smoker box.
An itemized list of all grill parts, including part numbers and descriptions.
To Next Page
General
