Lynx SEDONA User Manual

SEDONA by LYNX™ READY TO FINISH FIRE PIT ASSEMBLY INSTRUCTIONS
10 SEDONA by LYNX™ Ready to Finish Fire pit Assembly Instrucons
Step 4
Installing the Control Panel
The re pit control panel drops right into the opening of the base once the two
top panels have been secured. You will need to connect the gas regulator to
portable gas tank.
Installaon...connued
Liquid Propane portable
tank regulator
Lighng Instrucons
Step 1: Make sure the gas valve on the tank is open.
Step 2: Start the spark igniter by pressing the knob, and turn the knob to light, while holding it down.
Step 3: Once ignion occurs, release the knob and adjust the temperature to your preference. If the burner does not light
In 4 seconds, wait 5 minutes for gas to dissipate and repeat step 2.

Lynx SEDONA Specifications

General

Brand	Lynx
Model	SEDONA
Category	Outdoor Fireplace
Language	English