Lynx SEDONA - Step 3: Assembling the Top Panel

9 SEDONA by LYNX™ Ready to Finish Fire pit Assembly Instrucons
SEDONA by LYNX™ READY TO FINISH FIRE PIT ASSEMBLY INSTRUCTIONS
Step 3
Assembling the Top Panel
The top panel comes in two parts. Secure the right hand top panel to the base using two of the supplied four Philips
head screws (#32595) and two of the eight supplied washers (#14044) on the two far right posions of the panel.
Secure the panel to the center of the base with two of the supplied four Philips head screws (#14030) and two of
the eight supplied washers (#14044).
Installaon...connued
Repeat the same steps for the le hand top panel