Lytx ER-SF300 User Manual

Page 1 of 51
(North America Edition)
©2019 Lytx, Inc. - Confidential & Proprietary.
Lytx
®
SF-Series Event Recorder
Installation Instructions
(North America Edition)
Last updated: 4/1/2019
THE DEVICE SHOULD BE INSTALLED AND MAINTAINED BY QUALIFIED TECHNICIANS. Only a properly qualified technician
should install and maintain the SF-Series device. Any electrical work should be performed only by an ASE (minimum T6
& L2), MECP or equivalent certified technician with an expertise in installing and troubleshooting advanced vehicle
onboard components including multiplexed circuits. Lytx, Inc. disclaims all responsibility for any damages arising from
improper installation and maintenance of the SF-Series device.
This guide is protected as confidential and proprietary information of Lytx, Inc. Copying and use of this guide for any
purpose other than installing SF-Series in vehicles of Lytx, Inc.’s customers is expressly prohibited. Information
contained in this guide was in effect as of the date set forth above and is subject to change without notice or liability.
Lytx, Inc. reserves the right to revise the information presented or to discontinue the production of parts described at any
time.

Lytx ER-SF300 Specifications

General

Brand	Lytx
Model	ER-SF300
Category	Voice Recorder
Language	English

Summary

Safety Instructions

Installation Safety Warnings

Driver Safety Warnings

Lytx Installation Tool Setup

Tool Acquisition and Installation

SF-Series Installation Procedures

Mounting the Event Recorder

Step-by-step guide for mounting the bracket and event recorder, including location selection.

Electrical Wiring Connections

Comprehensive guidance on wiring, safety, diagrams, power, ground, and network connections.

Testing and Final Verification

Procedures for testing event creation, tool connectivity, and final installation checks.

Optional Parts Installation

Mounting Bracket & Arm Installation

Remote Push Button Setup

Maintenance & Troubleshooting

Installation Troubleshooting Guidance

Guidance on diagnosing and resolving issues encountered during installation.

Post-Installation Troubleshooting

Diagnostic Mode and Support

Initiate & Use Diagnostic Mode

Steps to enter Diagnostic Mode and interpret LED status lights for troubleshooting.