Need help?Do you have a question about the M-Audio BX8 D3 and is the answer not in the manual?
General| Product color | Black |
|---|---|
| LED indicators | Yes |
| Recommended usage | Studio |
| Multi-Room Streaming (MRS) support | - |
| Speaker type | 2-way |
| RMS rated power | 150 W |
| Number of drivers | 2 |
| Speaker placement | Floor |
| Audio output channels | - channels |
| Woofer diameter (imperial) | 8 \ |
| Tweeter diameter (imperial) | 1.25 \ |
| Amplifier class | A/B |
| Impedance | 10 Ω |
| Sensitivity | 12 dB |
| Frequency range | 37 - 22000 Hz |
| Crossover frequency | 2000 Hz |
| Signal-to-Noise Ratio (SNR) | 114 dB |
| Line-in Total Harmonic Distortion plus Noise (THD+N) (1kHz) | - % |
| Amplifier/receiver input interface type | XLR |
| Connectivity technology | Wired |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Built-in display | No |
Weight and Dimensions| Depth | 302 mm |
|---|---|
| Width | 250 mm |
| Height | 384 mm |
| Weight | 10500 g |
Overview of the BX8 D3, box contents, and where to find support.
Detailed explanation of the rear panel connectors and controls.
Description of the front panel drivers and speaker placement LED.
Guidelines for safe handling, power connection, and voltage selection.
Instructions for connecting the BX8 D3 monitors via XLR or TRS cables.
Recommendations for optimal speaker positioning for best audio performance.
Guidance on ideal speaker height and upright vs. horizontal placement.
Comprehensive technical details including driver sizes, frequency response, and power.
Information regarding M-Audio trademarks and licensing agreements.
To Next Page
