Need help?Do you have a question about the M-Audio BX8a and is the answer not in the manual?
General| Type | Active Studio Monitor |
|---|---|
| Frequency Response | 38 Hz - 22 kHz |
| Woofer Size | 8 inches |
| Tweeter Size | 1 inch |
| Crossover Frequency | 2.2 kHz |
| HF Amplifier Power | 50 W |
| Polarity | Positive signal at + input produces outward LF cone displacement |
| Input Sensitivity | 85 mV pink noise input produces 90 dBA output SPL at one meter with volume control at maximum |
| Inputs | XLR, TRS |
| LF Driver | 8" Kevlar curved cone with high-temperature voice coil and damped rubber surround |
| HF Driver | 1" magnetically shielded natural silk dome |
| Signal-to-Noise Ratio | > 100 dB |
| Input Impedance | 20 kOhms balanced, 10 kOhms unbalanced |
Identifies numbered features on the rear panel, including input jacks and connectors like XLR and TRS.
Advises on safe handling of speakers, avoiding contact with cones, and proper unpacking procedures.
Details correct power connection, emphasizing the Voltage-Select Switch for appropriate voltage settings.
Explains how to connect XLR balanced and TRS balanced/unbalanced cables to the BX8a inputs.
Provides guidelines for placing speakers in a triangle formation with the listener and at ear level.
Warns about risk of electric shock, advising against opening the unit and proper plug usage.
To Next Page
