Within the Delta 1010’s PCI chip is a hardware digital mixer. Controlled by the
included Delta Control Panel software, it may handle all of your routing needs,
give you extra control of all left, right and stereo levels, in addition to control of
pans, solos, and mutes.
Product Features & Specifications
• 10x10 24-bit/96khz full-duplex recording interface.
• PCI host card with external rack-mounted converter unit.
• 8x8 analog I/O, balanced or unbalanced on 1/4” TRS connectors,
+4dB or -10dB operation, individually selectable on the external
rack-mount unit.
• MIDI and Word Clock I/O on the rack-mount unit, S/PDIF I/O on
the PCI card.
• High dynamic range (A-weighted measured): D/A 108dB, A/D
109dB.
• Low distortion (measured THD @ 0dBFS): D/A less than 0.0015%,
A/D less than 0.001%.
• All data paths support up to 24bit/96kHz performance, no upgrades
necessary.
• Comprehensive digital mixing, routing, and monitoring capabilities
with included Delta Control Panel software.
• Hardware sample-accurate sync will allow linking of multiple Delta
units.
• Windows 95/98 multi-card drivers with ASIO1 and ASIO2 multi-
card, GSIF and EASI drivers included; Windows NT multi-card and
Mac OS drivers with ASIO 1&2 also included.
Minimum System Requirements
Windows
• Windows 95 or Windows 98.
• Pentium II 300MHz for 96kHz operation. Pentium 300 MMX for
48kHz or less.
• 128 MB of PC100 RAM for 96kHz operation. 64MB SDRAM for
48kHz or less.
Mac
• Mac G3 or G3 accelerator with 128 MB of RAM recommended.
• Mac OS 8.5.1 minimum (8.6 recommended.)
• UDMA EIDE or fast SCSI HDD recommended.
3
To Next Page
Loading...
