GSR Speakers Guide14
GSR12
Above specifications subject to change without notice
Type Active two-way bass reflex design
Frequency Response +/– 3 dB: 53 Hz to 20 kHz (Mode set to Normal)
Frequency Range 42 Hz to 22 kHz (–10 dB points) (Mode set to Normal)
Crossover Pattern: 90° H x 60° V nominal
Crossover Frequency: 2.8 kHz
24 dB/octave 4th-order alignment
System Power Rating 300 W continuous, 600 W peak
Maximum SPL 127 dB
Nominal Impedance 8 Ohms
LF Driver 12-inch (30.48cm) neodymium magnet woofer with 2 1/2-inch voice coil
250 W continuous at driver impedance
HF Driver 1.3-inch (34mm) titanium diaphragm compression driver
50 W continuous at driver impedance
High-Pass Filter (HPF) 75 Hz
Input Balanced XLR/TRS (1/4-inch) combo jack with XLR loop through
Pole Socket 1 3/8-inch (36mm) pole mount socket with stabilizing screw
Mounting 5 x M10 suspension points (2 bottom, 2 top, 1 rear)
AC Input 220–240 VAC ~ 50 Hz
100–120 VAC ~ 60 Hz
Dimensions (H x W x D) 26.3” x 16.3” x 13.5” (66.8cm x 41.4cm x 35cm)
Net Weights 31 lbs (14 kg)
To Next Page
Loading...
