M-Audio GSR10 - Chapter 1. Introduction

Chapter 1: Introduction 1
Chapter 1: Introduction
Welcome to the M-Audio GSR series of active loudspeakers.
The GSR series loudspeakers have been designed from the
ground up to provide stunning sound every time, everywhere,
and includes the following three speakers:
GSR10 Active two-way, sound reinforcement speaker with
one 10-inch woofer, and one 25mm compression driver.
GSR12 Active two-way sound reinforcement speaker with one
12-inch woofer, and one 34mm compression driver.
GSR18 Active subwoofer speaker with 18-inch woofer.
Features
GSR10 and GSR12
• Amplification: Class D, Bi-amped
• GSR10 LF: 200W, HF: 50W
• GSR12 LF: 250W, HF: 50W
• Tuning mode Presets:
•Normal
•Hi-Fi
•DJ
•Voice
•XLR/TRS combo input
• Mic/Line selector
• High-pass filter
• Built-in limiter protection circuit
• Thru (output) XLR jack
• Automatic input voltage sensing (110V – 240V)
• Portable and flexible
GSR18
• Amplification: Class D, 500W
• Stereo XLR/TRS combo inputs
• Variable low-pass Frequency control
•Phase invert
• Thru (output) XLR jacks
• Automatic input voltage sensing (110V – 240V)
For setup and connection instructions, see
Chapter 2, “Setups.”
For more information on the front and back panel features of
each speaker, see Chapter 3, “Hardware Overview.”