M-Audio KEYRIG 49 - Certification; Online Certification; Offline Certification; Opening the Key Rig Virtual Instrument Software

Quick Start Guide » 3
Italiano Espanol Deutsch Français English
Certification:
Online:
Ifyourmusiccomputerisconnectedtotheinternet,followtheseinstructionsfor
certication:
1. Start M-Audio Key Rig in standalone mode.
2. Click on the M-Audio logo.
3.Double-clicktheboxlabeled“EnterCerticationCodeHere.”Enter
yourcerticationcode(foundonthefrontoftheQuickStartGuide)
and click Certify On-Line.
4.Awebsiteopenswithalinktoyourpersonalcerticationle.Download
thisletoyourcomputeranddouble-clickonit.
5.RestartKeyRigtocompletethecerticationprocess.
Offline:
Ifyourmusiccomputerisnotconnectedtotheinternet,followtheseinstructions
forcertication:
1. Start M-Audio Key Rig in standalone mode.
2. Click on the M-Audio logo.
3.Enteryourcerticationcode(foundonthefrontoftheQuickStart
Guide) and click Certify Off-Line.
4.M-AudioKeyRigplacesanInternetShortcutleonyourdesktop.
5.Usingadisk,memorycard,orothermedia,transfertheInternet
ShortcutletoacomputerwithInternetaccess.
 6. Double-clicktheInternetShortcut,andawebsiteopenswithalinkto
yourpersonalcerticationle.Downloadthisle,andtransferittoyour
music computer.
 7. Oncetransferredtoyourmusiccomputer,double-clickthecertication
le.
 8. RestartKeyRigtocompletethecerticationprocess.
NOTE: An ASIO-compatible sound card is
required for the Key Rig virtual instrument
software to operate in standalone mode.
Opening the Key Rig Virtual Instrument
Software
Once the Key Rig software is properly installed, there are two options for
opening your new software:
1. Standalone mode:DoubleclicktheKeyRigshortcuticonthat
wasplacedonyourcomputer’sdesktopduringinstallation.Ifthis
icon does not appear, click on Start > All Programs > M-Audio >
Key Rig > Key Rig to launch your new software.
2. VST or RTAS plug-in: Launch your host application, and select
Key Rig as a virtual instrument on an empty track. Consult your host
application’s documentation for more information on this.