M-Audio KEYRIG KeyRig 49 - Volume Slider Assignment; The Volume Slider

|
14
KeyRIg 49 User Guide
The Volume Slider
AswiththeModulationwheel,theVolumeslidercanalsobeassignedtoanyofthe132controllers(0-131)shownatthebackofthis
manual.
To assign the Volume slider to a certain MIDI parameter:
 1. PresstheEditModebutton.
 2. PresstheblackkeyaboveD4(D#4),representing“SLIDERASSIGN.”
 3. UsetheNumericalDataEntrykeysG3–B4toenterthenumberofthecontrollervalueyouwanttoassigntothe
Volumeslider.
 4. PresstheENTERkey(C5).
Ifyoumakeanerrorwhileenteringthenumericaldatavalue,youcanpresstheCANCELkey(C1)toexitEditmodewithout
changingtheMIDICCassignedtotheVolumeslider.
PLEASE NOTE: Each time the keyboard is turned off, optional MIDI parameters assigned to
the Volume slider or Modulation wheel will be lost. Each time the keyboard is powered up, the
Volume slider will default to being assigned to Volume (MIDI CC 07), and the Modulation wheel
will default to being assigned to modulation (MIDI CC 01).